F 150 4WD Pickup V8-4.6L VIN W (2006)
Seals and Gaskets: Service and Repair
Transfer Case Rear Output Shaft Seal
Special Tools
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer Maintenance/Service and Repair.
2. NOTE: Index-mark the rear driveshaft yoke and pinion flange to maintain initial driveshaft balance during installation.
Remove the rear driveshaft.
3. Using a suitable tool, remove the transfer case rear output shaft seal.
4. To install, reverse the removal procedure.
^
Using the special tool, install the oil seal.
