F 150 4WD Pickup V8-4.6L VIN W (2006)
1. Install the digital TR sensor and loosely install the bolts.
2. Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
3. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Tighten the digital TR sensor bolts.
^
Tighten to 9 Nm (80 inch lbs.).
4. Install the manual control lever.
1. Position the manual control lever.
2. Install a new manual control lever nut.
^
Tighten to 33 Nm (24 ft. lbs.).
