F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
2
Remove the B-pillar assist handle.
5. Position the D-ring cover aside and remove the D-ring nut.
6. Position aside the front and rear door weatherstrips.
7. Position the B-pillar trim panel aside.
8. Using the special tool, remove the safety belt anchor bolt.
9. Remove the B-pillar trim panel.
10. To install, reverse the removal procedure.
C-Pillar Trim Panel
C-PILLAR TRIM PANEL
Removal and Installation
1. Disconnect the battery ground cable.
2. Fold down the rear seat backrest.
3. Position the back panel trim cover aside.
1
Remove the pin-type retainers.
2
Position the cover aside.
