F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Wheel Speed Sensor: Service and Repair
Four Wheel Antilock Brake System (4WABS)
Sensor, Front
Sensor-Front, 4x4
Removal
1. Disconnect the front brake anti-lock sensor electrical connector.
2. Remove the front disc bake rotor shield.
3. Remove the (A) front brake anti-lock sensor bolts and the (B) front bake anti-lock sensor.
Installation
1. To install, reverse the removal procedure.
Sensor, Rear
Sensor-Rear
Removal and Installation
1. Raise and support vehicle.
2. NOTE: Clean off dirt and debris that may have collected around the rear anti-lock brake sensor before removal.
Remove the rear anti-lock brake sensor.
