F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
3. Disconnect the electrical connectors and remove the headlamp switch.
4. Remove the adjustable pedal switch.
1
Push the adjustable pedal switch out of the instrument panel far enough to access the electrical connector.
2
Disconnect the electrical connector and remove the adjustable pedal switch.
5. To install, reverse the removal procedure.
Brake Pedal Motor
Brake Pedal Motor
Removal and Installation
1. Disconnect the brake pedal motor electrical connector.
2. Remove the brake pedal motor bolts.
3. NOTE: Hand-tighten bolts.
