F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
7. Pull back the parking brake cable spring and disconnect the parking brake lever.
Installation
1. Compress the parking brake cable spring and attach the parking brake lever.
2. Clean and lubricate the brake backing plate.
^
Use Silicone Brake Caliper Crease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or an equivalent silicone compound
meeting Ford specification ESE-MlC171-A.
3. Attach the parking brake lever to the rear brake shoe and lining and secure the parking brake lever pin retainer.
4. Install the rear brake shoes and linings.
1
Position the rear brake shoes and linings.
2
Install the brake shoe hold-down spring pins and the brake shoe hold-down springs.
