F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Romeo engine (4.6L)
9. Install the EGR valve to exhaust manifold tube.
^
Install the differential pressure feedback EGR sensor and connect the electrical connector.
^
Tighten both fittings starting at the top in two stages.
^
Stage 1: Hand-tighten.
^
Stage 2: Tighten to 35 - 45 Nm (26-33 ft. lbs.).
Windsor engine (SAL)
10. Install the EGR valve-to-exhaust manifold tube.
^
Tighten both fittings starting at the top in two stages.
^
Stage 1: Hand-tighten.
^
Stage 2: Tighten to 40 - 60 Nm (30 - 44 ft. lbs.).
^
Connect the two differential pressure feedback EGR sensor hoses.