ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Compressor Fitting HVAC|Description and Operation|Page 9192 > < Compressor Clutch Relay|Locations|Page 9188
Page 1
background image

Compressor Fitting HVAC: Description and Operation

The A/C manifold and tube is attached to the A/C compressor, is sealed with the O-ring seals and has the following features:

^

The upstream side contains low pressure refrigerant gas.

^

The downstream side contains high pressure refrigerant gas.

^

An integral non-serviceable muffler and a serviceable high pressure A/C charge port valve are located on the downstream side.

^

The downstream side also contains a fitting used to mount the A/C pressure cutoff switch. A long-travel Schrader-type valve stemcore is installed
in the fitting so that the A/C pressure cut-off switch can be removed without discharging the A/C system.

Compressor Fitting HVAC|Description and Operation|Page 9192 > < Compressor Clutch Relay|Locations|Page 9188