F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Alignment: Service and Repair
Ride Height
RIDE HEIGHT
Adjustment
1. Drive the vehicle onto a runway lift.
2. Jounce the vehicle's front and rear suspension to normalize the vehicle's static ride height.
3. CAUTION: The torsion bar adjustment bolt is coated with dry Loctite and must be replaced if it is backed off or removed. Failure to do so can
cause the adjustment bolt to loosen up during operation and a loss of vehicle alignment.
Measure the front suspension from the centerline of the front suspension lower arm bushings to the runway lift. Record the measurement.