F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
NOTE: The EGR valve sealing surfaces are soft metals.
2. Install the EGR valve.
^
Tighten the two bolts in two stages.
^
Stage 1: Tighten the bolts to 20 Nm (15 Lb-Ft).
^
Stage 2: Tighten the bolts an additional 90 degrees.
3. Connect the EGR valve.
^
Connect the EGR valve tube.
^
Connect the vacuum line.
4. Position the bracket and install the nut.
5. Position the accelerator control splash shield and install the bolts.
