F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
4.
Remove and discard the clamp from the compuvalve fuel outlet hose, then disconnect the hose from the compuvalve. See Figure 1.
5.
Disconnect the 8-pin and the 4-pin electrical connectors. See Figure 1.
6.
NOTE: For proper reassembly, note the compuvalve shim positioning prior to removing the shim (CNG vehicles only).
To access the connections on the rear of the compuvalve, remove the two (2) mounting screws and separate the compuvalve from the mounting
bracket. On CNG vehicles only, remove the compuvalve shim from the mounting bracket. See Figure 1.
7.
Disconnect the vacuum line from the compuvalve. See Figure 2.
8.
Remove the two (2) connector retaining screws and disconnect the main electrical connector from the compuvalve. See Figure 2.
