Ford Workshop Service and Repair Manuals > F 150 4WD Pickup V8-5.4L CNG VIN M (2001) > Powertrain Management | Sensors and Switches - Powertrain Management | Sensors and Switches - Computers and Control Systems | Fuel Tank Pressure Sensor | Component Information | Service and Repair | Standard Models (Non Bi-Fuel)

Page 1

Fuel Tank Pressure Sensor: Service and Repair
Bi-Fuel Models

REMOVAL

1. Relieve the bi-fuel system pressure. See: Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure Release/Service and Repair/Bi-Fuel Models

2. Disconnect the electrical connector.

3. Remove the fuel tank pressure sensor.

INSTALLATION

1. To install, reverse the removal procedure.

Ford Workshop Service and Repair Manuals