F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Seat Belt Buckle: Service and Repair
Full Bench Seat
Torx Bit Tool Set Used For T55 "Torx Plus" Bit
SPECIAL TOOL(S)
REMOVAL
1. Remove the front center and RH passenger safety belt buckle ends.
1
Use the special tool to remove the buckle bolts.
2
Feed the buckle assembly up through the top of the seat cushion and remove the front seat safety belt buckles.
3
Feed the LH driver buckle and center passenger tongue assembly up through the top of the seat cushion and remove the front seat safety belt
buckle/tongue assembly.
INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.