F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
Intake Manifold: Service and Repair
Removal
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
All Vehicles
1. Disconnect the battery ground cable.
2. Perform pre-service procedures.
3. Drain the cooling system.
4. Compress and slide the hose clamp and disconnect the upper radiator hose.
5. Remove the Engine Air Cleaner (ACL) and air cleaner outlet tube.
6. Remove the accelerator control splash shield.
1
Remove the bolts.
2
Remove the accelerator control splash shield.
7. Disconnect the accelerator cable from the accelerator cable bracket.
1
Remove the bolt.
2
Slide the accelerator cable up to remove it from the accelerator cable bracket.
