F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
Audible Warning Device: Service and Repair
Key In Ignition Warning Switch
REMOVAL
1. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
2. Remove the key-in-ignition warning switch.
1
Pry the clip down.
2
Push the key-in-ignition warning switch off the rear of the ignition switch lock cylinder.
INSTALLATION
