F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
Gear Sensor/Switch: Service and Repair
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs which can result in shifting of the vehicle during these operations.
Raise and support the vehicle.
2. Remove the 4WD indicator switch.
1
Disconnect the 4WD indicator switch electrical connector.
2
Remove the 4WD indicator switch.
Installation
1. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Follow the removal procedure in reverse order.
