F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
1. To install, reverse the removal procedure.
-
Check the restraint system for normal operation.
40 Percent Portion of 60/40 Split Bench
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1. Remove the driver seat safety belt buckle.
1
Disconnect the safety belt warning indicator switch electrical connector.
2
Use the special tool to remove the bolt.
3
Remove the driver seat safety belt buckle.
NOTE: To ease removal, position the 40% seat in its most rearward position and the 60% seat in its most forward position.
INSTALLATION
