F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1. Remove the upper corner trim panel.
2. Remove the lower corner trim panel.
3. Remove the front safety belt retractor.
1
Use the special tool to remove the bolt.
2
Remove the front safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
-
Check the restraint system for normal operation.
NOTE:
-
Make sure that safety belt webbing is not twisted prior to installation.
-
Make sure that after an Automatic Locking Retraction (ALR) retractor is installed that the retractor is not in the ALR mode of operation when
it is installed.
Front
