F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
11. Install the three output shaft seal rings.
12. Install the No. 8 needle bearing on the direct clutch cylinder.
13. NOTE: Direct clutch cylinder may be installed after the output shaft ring gear is installed to the output shaft hub.
Assemble the direct clutch on the output shaft.
14. NOTE: The yellow dot on the output shaft must be aligned with the yellow dot on the output shaft ring gear.
Align the yellow dots on output shaft and the output shaft ring gear and install the ring gear on the output shaft.
