F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
3. Align the (A) extension housing seal in the extension housing, with the (B) drain hole positioned downward.
4. Using the (A) Extension Housing Seal Replacer, seat the extension housing seal into the (B) extension housing.
5. Install the driveshaft.
6. Lower the vehicle.
7. Reconnect the battery ground cable.
8. Fill the transmission to the specified level with Motorcraft Motorcraft MERCON Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or
equivalent Meeting MERCON specification. MERCON(R) automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid,
as per TSB 06-14-4.
