F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
14. NOTE: Coat the lips of the pinion seal with Motorcraft SAE 75W90 4x4 Axle Lubricant XY-75W90-QL or equivalent meeting Ford
specification WSP-M2C201-A.
Place the pinion seal on the special tool.
15. Place the special tool and seal in the pinion seal bore and drive the seal into place.
16. Lightly lubricate the pinion gear splines with Motorcraft SAE 75W90 4x4 Axle Lubricant XY-75W90-QL or equivalent meeting Ford
specification WSP-M2C201-A.
17. Position the pinion gear.
18. CAUTION: Never install the axle universal joint flange with a hammer.
NOTE: Disregard the scribe marks if installing a new flange.
Align the index-marks and position the universal joint flange on the pinion shaft.
