F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
4. If removed, position the axle shaft dust deflector for installation.
1
Position the axle bearing seal plate on the press bed.
2
Position the special tool.
3
Position the axle shaft dust deflector.
5. If removed, use a suitable press to press the axle shaft dust deflector on the axle shaft.
6. Insert the axle shaft into the axle housing tube.
7. Lubricate the steel thrust washer.
-
Use Premium Long Life Grease XG-1-C or -K or equivalent meeting Ford specification ESA-M1C75-B.
8. Install the tanged thrust washer and the steel thrust washer.