F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
26. Using the special tool and a soft hammer, remove the pinion gear.
1
Install the special tool.
2
Hold the pinion gear inside the carrier housing.
3
Using a soft face hammer, remove the pinion gear from the carrier housing.
27. Discard the drive pinion collapsible spacer.
28. CAUTION: Do not damage the carrier housing while removing the pinion seal.
Remove the pinion seal and slinger.
-
Pry up on the seal flange. Install gripping pliers, and strike with a hammer to remove the seal.
29. Remove the outer pinion bearing.
30. Using the special tools, remove the inner pinion bearing cup.