Front Axle Shaft Assembly Repair for F 150 4WD Pickup V8-54L SOHC VIN 3 (1999)
10. Lubricate and position the six balls.
-
Use High Temp Constant Velocity Joint Grease E43Z-19590-A provided in the boot kit meeting Ford specification ESP-M1C207-A.
11. Position the clamp protector and the inboard boot clamp on the inboard CV joint housing.
12. Fill the inboard CV joint housing with 235 grams of grease.
-
Use High Temp, Constant Velocity Joint Grease E43Z-19590A provided in the boot kit meeting Ford specification ESP-M1C207-A.
13. Position the inboard CV joint housing and install the retaining ring.
