F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
Transfer Case Actuator: Service and Repair
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in
unexpected inflation or deflation of the air springs which can result in shifting of the vehicle during these operations.
Raise and support the vehicle.
2. Disconnect the shift motor electrical connector.
3. Remove the coil wire from the electric shift motor electrical connector.
1
Remove the wire connector spacer.
2
Remove the coil wire and pin.
-
Use correct electrical connector pin remover.
4. Remove the transfer case shift motor.
1
Remove the bolts.
2
Remove the transfer case shift motor.
Installation
