F 150 4WD Pickup V8-5.4L SOHC VIN 3 (1999)
Power Window Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the window regulator switch plate.
1
Pry up the window regulator switch plate.
2
Disconnect the electrical connectors.
3. Remove the window regulator control switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery ground cable is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
