F 150 4WD Pickup V8-5.4L SOHC VIN 5 (2004)
Air Bag(s) Arming and Disarming: Customer Safety Information
WARNING
-
If the supplemental restraint system (SRS) is being serviced, the system must be deactivated and restraint system diagnostic tools must be
installed.
The air bag restraint system diagnostic tools must be removed and the air bag modules reconnected when the system is reactivated to
avoid non-deployment in a collision, resulting in possible personal injury.
-
Never probe the connectors on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.
-
To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing
any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.
The front impact severity sensor is located on the hood latch support bracket.
To deplete the backup power supply energy, disconnect the battery and wait at least one minute. Be sure to disconnect auxiliary batteries
and power supplies (if equipped).
