F 150 4WD Pickup V8-5.4L SOHC VIN 5 (2004)
5. Remove the parts in the order indicated in the illustration and table.
Item 1: Restraints Control Module (RCM) Large Electrical Connector Removal Note
1. Disconnect the large restraints control module (RCM) electrical connector.
1
Pinch the thumb tab and pivot the connector position assurance lever all the way back until it stops.
2
Pull out and disconnect the RCM electrical connector.
INSTALLATION
1. NOTE: Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.
To install, reverse the removal procedure.
