F 150 4WD Pickup V8-5.4L SOHC VIN L (2001)
14. Slide the stoplight switch, booster push rod and the bushing (on the bake pedal pin.
15. Install the stoplight switch hairpin clip.
16. Install the instrument panel opening cover.
Brake Pedal and Bracket
Pedal and Bracket-Adjustable
Removal
1. CAUTION: The brake pedal and the accelerator pedal must be in the same position when installing a new cable or a new pedal. The pedals must
be in the all the way forward or all the way rearward position.
Disconnect the battery ground cable.
2. Remove the instrument panel opening cover.
3. Remove the nuts and the steering column support: bracket.
