F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
15. If equipped, disconnect the power seat track motor electrical connector and release any pin-type retainers attached to the seat cushion pan.
16. If equipped, disconnect the 3 memory seat motor position sensors (one shown) electrical connectors and release any pin-type retainers attached to
the seat cushion pan.
17. NOTE: Disconnect and release any remaining electrical connectors and pin-type retainers attached to the seat cushion and pan assembly.
Remove the 4 nuts and the seat cushion and pan assembly.
-
To install, tighten to 25 Nm (18 lb-ft).
Passenger seats
18. For disassembly of the passenger seat cushion assembly (cushion trim cover, foam pad and OCS, cushion pan), refer to the Occupant
Classification Sensor removal and installation procedure in Air Bag Systems.
Driver seats
