F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
Parts will not be direct shipped for this program. Order your parts requirements through normal order processing channels.
Questions regarding parts should be directed to the Special Service Support Center or E-mailed.
DEALER PRICE
For latest prices, refer to DOES II.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
OVERVIEW
This program involves replacing the brake booster vacuum hose at the rear of the engine intake manifold.
SERVICE PROCEDURE
Brake Booster Vacuum Hose Removal
1.
Lift the vehicle.
2.
4x4 only, index mark the front driveshaft. Remove the 4 front driveshaft bolts and position the front driveshaft aside. See Figure 1.
3.
Remove the 2 shifter cable bracket bolts and disconnect the shifter cable and position the bracket aside. See Figure 2.
NOTE:
Leave the transmission electrical harness clipped to the fuel line bracket.
4.
Unclip the fuel lines from the fuel line bracket and remove the fuel line bracket bolt from the transmission bell housing. See Figure 3.
5.
If present, disconnect the oxygen sensor wire harness retainer. See Figure 4.
