F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
11. Connect the CMP electrical connector.
12. NOTICE: Only use hand tools to install the camshaft phaser and sprocket assembly or damage may occur to the camshaft or camshaft phaser and
sprocket.
NOTICE: Damage to the camshaft phaser and sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
Tighten the camshaft phaser and sprocket bolt in 2 stages:
-
Stage 1: Tighten to 40 Nm (30 lb-ft).
-
Stage 2: Tighten an additional 90°.
13. In stall the LH valve cover.
RH
Special Tool(s)
