F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
LH engine support insulator
10. If installing the LH engine support insulator in a 4WD vehicle, align the front driveshaft flange to the front axle pinion flange at the index mark
and install the bolts.
^
Tighten to 111 Nm (82 ft. lbs.).
11. Install the oil level indicator and tube.
RH engine support insulator
12. Install the starter.
All vehicles
13. Install the transmission mount nuts.
^
Tighten to 103 Nm (76 ft. lbs.).
14. Install the exhaust system support bracket bolts to the crossmember.
^
Tighten to 40 Nm (30 ft. lbs.).