F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
^
Stage 2: Tighten an additional 60 degrees.
6. Connect the CKP sensor electrical connector.
7. Position the power steering pump assembly and install the 3 bolts.
^
Tighten to 25 Nm (18 ft. lbs.).
8. Using the special tool, install a new O-ring seal on the pressure line fitting.
9. Connect the power steering pressure tube.
^
Tighten to 65 Nm (48 ft. lbs.).
10. Using the special tool, install the power steering pump pulley.
