F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
22. Position the upper radiator hose support bracket and install the nut.
^
Tighten to 10 Nm (89 inch lbs.).
23. Lubricate the engine front cover and the crankshaft seal inner lip with clean engine oil.
24. Using the special tools, install a new crankshaft front seal into the engine front cover.
25. NOTE: If not secured within 4 minutes, the sealant must be removed and the sealing area cleaned with metal surface prep and silicone gasket
remover. Follow the directions on the packaging. Allow to dry until there is no sign of wetness, or 4 minutes, whichever is longer. Failure to
follow this procedure can cause future oil leakage.
Apply silicone gasket and sealant to the Woodruff key slot on the crankshaft pulley.
