F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
Hose/Line HVAC: Service and Repair
Condenser to Evaporator Line
CONDENSER TO EVAPORATOR LINE
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system, except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
1. Recover the refrigerant.
2. Remove the powertrain control module (PCM).
3. Remove the PCM bracket.
1
Remove the 3 PCM bracket bolts.
2
Remove the PCM bracket.
-
To install, tighten to 10 Nm (89 lb-in).
4. Disconnect the evaporator inlet fitting.
-
Discard the O-ring seals.
5. Disconnect the condenser outlet fitting.
-
Discard the O-ring seal.
-
To install, tighten to 25 Nm (18 lb-ft).
6. Remove the condenser to evaporator line.
