F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
DEALER PRICE
For latest prices refer to DOES II.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
OVERVIEW
On some of the affected vehicles, it may be possible for the clockspring to driver side frontal air bag wire harness to chafe on the horn mounting plate.
This may cause the air bag warning lamp to illuminate in the cluster indicating service is required. If the air bag warning lamp is ignored, this chafing
may cause the driver side frontal air bag to inadvertently deploy and may result in personal injury. Dealers are to replace the clockspring to driver side
frontal air bag wire harness with a service part that incorporates additional chafe protection.
SERVICE PROCEDURE
1. Remove the driver air bag. For additional information, refer to the appropriate WSM, Section 501-20B.
2. Release the clockspring connector lock and disconnect the harness from the clockspring. See Figure 1.
3. Install the new clockspring to driver air bag wire harness using the following sequence:
1. Connect the harness to the clockspring.
2. Make sure the harness lock at the clockspring is seated.
3. Connect the harness to the air bag.
4. Install the driver air bag. For additional information, refer to the appropriate WSM, Section 501-20B.
