F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
Rear Cross-Member: Service and Repair
TRANSMISSION SUPPORT CROSSMEMBER
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 2 exhaust hanger bolts.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the 2 heat shield bolts.
-
To install, tighten to 20 Nm (15 lb-ft).
4. Support the transmission with a suitable jack.