F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
11. Force up on the metal flange of the drive pinion seal. Install gripping pliers and strike with a hammer until the drive pinion seal is removed.
Installation
1. Lubricate the new drive pinion seal with grease.
2. CAUTION: If the new drive pinion seal becomes misaligned during installation, remove the drive pinion seal and install a new drive pinion seal.
Using the special tool, install a new drive pinion seal.
3. Lubricate the pinion flange splines with axle lubricant.
4. NOTE: Disregard the scribe marks if a new pinion flange is being installed.
Align the pinion flange with the drive pinion shaft.
5. Using the special tool, install the pinion flange.
