F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
^
Heat is not required to straighten the casting.
^
Pry bars are suggested tool of choice to aid in straightening.
^
If the paint coating is damaged, then the paint coating will have to be repaired. See PAINT REPAIR section of this TSB.
REMOVAL AND REPLACEMENT GUIDELINES
When replacing the radiator support, the new support comes as an assembly with the bridging brackets already riveted to the new support. When
removing the existing radiator support assembly, remove by cutting the factory spotwelds on the bridging brackets. Do not cut or drill out the bridging
brackets at the riveted locations.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
Disclaimer