F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
Coolant Reservoir: Service and Repair
Degas Bottle
Removal and Installation
1. Partially drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding.
2. Remove the degas bottle hose from the radiator.
1
Release the hose clamp and slide it away from the hose end.
2
Slide the overflow hose off the radiator fitting.
3. Disconnect the lower radiator hose from the degas bottle.
4. Remove the degas bottle.
5. To install, reverse the removal procedure.
