F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator
TEMPERATURE BLEND DOOR ACTUATOR
REMOVAL
All vehicles
1. WARNING: To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing
or replacing any front or side air bag supplemental restraint (SRS) components and before servicing, replacing, adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).
Disconnect the battery ground cable and wait at least one minute.
Vehicles equipped with floor console
2. Remove the floor console.
All vehicles
3. Remove the floor duct panel.
-
Remove the pin-type retainers and release the expander clip.
4. Remove the RH instrument panel brake.
1
Remove the nut.
2
Remove the bolt.
3
Remove the brace.