F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
2. Remove the A/C clutch disc and hub retaining bolt.
1
Hold the A/C clutch disc and hub with the special tool.
2
Remove the bolt.
3. Remove the A/C clutch disc and hub and the spacer.
1
Thread an 8 x 1.25 mm (0.04 in) bolt into the A/C clutch disc and hub to force it from the compressor shaft.
2
Lift the A/C clutch disc and hub and the spacer from the compressor shaft.
4. Remove the shaft seal felt from the nose of the A/C compressor with the special tool.
5. Clean the compressor nose area.
6. Insert the tip of the special tool into one of the snap ring eyes.
