F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
Fuel Line Coupler: Service and Repair
Quick Release Coupling
Dual Locking
QUICK RELEASE COUPLING - DUAL LOCKING
DISCONNECT
WARNING:
-
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel- related component. Highly
flammable mixtures are always present and can be ignited, resulting in possible personal injury.
-
Fuel in the fuel system remains under high pressure even when the engine is not running. Before servicing or disconnecting any of the fuel
lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury
or a fire hazard.
NOTE: These couplings are used to connect the fuel tank fuel lines to the front fuel lines, and the pump/sender assembly ports.
1. Release the fuel system pressure.
2. Unclip the tab.
3. Depress the tabs and press the clip downward.
4. Separate the fittings.
CONNECT
1. To connect the fittings, reverse the disconnect procedure.
