F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
Ignition Switch Lock Cylinder: Service and Repair
Key Release Button
Key Release Button
Removal
1. Remove the ignition switch lock cylinder.
1
Insert the ignition key into the ignition switch lock cylinder and turn to the RUN position.
2
Insert a punch through the hole in the lower steering column shroud and push the ignition switch lock cylinder release tab while pulling out the
ignition switch lock cylinder.
2. Twist the tilt wheel handle and shank and remove.
3. Release the four clips and remove the steering column opening cover.