F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
3. Remove the passenger air bag deactivation (PAD) switch.
1
Disconnect the electrical connector.
2
Remove the retaining bolts.
3
Remove the PAD switch.
INSTALLATION
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions and notes at the beginning of the removal
procedure.
1. Install the PAD switch.
1
Position the PAD switch.
2
Install the bolts.
3
Connect the electrical connector.
2. Install the center instrument panel finish panel.
3. Connect the battery ground cable.
4. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS). See: Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure
5. Disconnect the battery ground cable and wait at least one minute.
6. Restore the vehicle to operating condition.
1
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS).
