F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
4. Remove the bolt from the exhaust hanger.
5. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and OSS
sensors will occur.
Remove the rear transmission mount.
1
Raise the transmission up off the rear crossmember support.
2
Remove the bolts.
3
Remove the rear transmission mount.
Installation
1. CAUTION: Be sure not to raise the back of the transmission too high. If it makes contact with the underbody, damage to the TSS and OSS
sensors will occur.
Install the rear transmission mount.
1
Raise the transmission up.
2
Install the rear transmission mount.
3
Install the bolts.
2. Lower the transmission on to the rear crossmember support.