F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
7. CAUTION: Do not damage the wheel bearing oil seal.
Remove the two axle shafts.
Installation
1. Lubricate the lip of the wheel bearing oil seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-MIC75-B.
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the two axle shafts.
3. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Install the U-washers.
1
Position the two U-washers on the button ends of the axle shafts.
2
Pull the axle shafts outward.
