F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
9. Cut the urethane applicator tip to specification.
10. Apply a bead of Urethane Adhesive Essex 400 HV meeting Ford specification WSB-M2G316-B to the pinch weld just outside the foam dam.
11. Install the upper windshield weatherstrip.
12. CAUTION: Open the windows to prevent the windshield glass from being pushed out by air pressure if a door is closed.
Using the alignment marks, install the windshield glass.
13. Check the installation for air and water leaks through the urethane bond and add urethane adhesive where needed.
14. NOTE: Use one continuous stroke when removing the excess urethane adhesive.
Paddle the excess urethane adhesive from the two sides of the windshield glass.
