F 150 Heritage 2WD Pickup V8-5.4L SOHC VIN 3 (2004)
4. CAUTION: Be sure not to raise the back of the transmission too high. If it makes contact with the underbody, damage to the TSS and OSS
sensors will occur.
Install the rear transmission mount.
1
Raise the transmission up.
2
Install the rear transmission mount.
3
Install the bolts.
5. Lower the transmission on to the rear crossmember support.
6. Install the transmission insulator and nuts.
7. Remove the high lift transmission Jack with the special tool from the transmission.
